L Class 110V Vacuum Cleaner 30L Wet & Dry Industrial with 110V PTO Vacmaster

  

The Vacmaster WD L30 110V L Class Dust Extractor has been independently certified for the safe extraction of light hazardous dusts with a workplace exposure limit (WEL) value of >1 mg/m3. L Class wet and dry vacuum cleaners should be used when collecting materials such as soft woods, gypsum, plasterboard and Corian.

They are our recommended industrial wet and dry vacuum cleaner for workshops, trades and construction sites. This impressive 110V, 30 litre wet and dry vacuum cleaner is powered by a 1000W motor, delivering 178 Air Watts of suction power and generating a maximum airflow of 48.5 L/s and 23 kpa vacuum pressure. A powerful 750W 110V Power Take Off socket can be used to automatically extract dust as you sand or drill. With its 110V 16A power supply it is manufactured to meet UK Health and Safety Executive guidelines for safe, portable electrical equipment. This vacuum cleaner operates from a 110V (CTE) isolating transformer so that the maximum voltage to earth does not exceed 55 Volts.

Includes a HEPA 13 cartridge filter and pre-filter; removing 99.95% of harmful dust and allergen particles down to 0.3 microns from the vacuum's air stream. Designed for heavy duty use, the WD L30 110V is constructed with a stainless-steel collection tank, extension tubes and air flow control handle. A 2.5m crush resistant suction hose and a toughened PVC 5m cable provide a working reach of approx.